How to Install the Dual dash dam or 3 Channel dash cam?
By YEECORE
October 8th, 2024
168 views
Installing the dual dash cam or 3 channel dash cam can be simple if you follow these steps.Step 1: Gather Your Tools: You will need dual dash cam/3 channel dash cam, rear cable, adhesive mounts, a power cable, and a tool to tuck wires (like a trim tool).Step 2: Mount the Front CameraChoose a spot behind your rearview mirror.Clean the area with alcohol to ensure good adhesion.Attach the camera using the adhesive mount.Step 3: Route the Power CableHide the cable along the headliner and down the A-pillar.Use the trim tool to tuck the cable into any crevices.Connect the power cable to your vehicle's power source, usually the 12V socket.Step 4: Mount the Rear CameraChoose a location on the rear windshield, just below the top edge.Clean the area and attach the rear camera.Step 5: Run the Rear Camera CableRoute the cable from the rear camera to the front.Ensure it follows the same path as the front camera cable.Step 6: Test the SetupPower on your dash cam system to ensure both cameras work.Adjust angles as needed to get clear views.Tips:Make sure the cameras do not obstruct your view while driving.Check the manufacturer’s instructions for specific features.Keep excess cable hidden and secure to avoid tangling.
Previous
What a dash cam can do for you?
Read More
